Click Here to Live Chat With Us

Setting up your Brother printer +1-888-966-6097 on a Wi-Fi network allows you to print wirelessly from your computer, phone, or tablet. Follow this step-by-step guide to connect your Brother printer to Wi-Fi and troubleshoot any issues.

Step 1: Prepare for Wi-Fi Setup

Before starting, ensure the following:

  • The printer is powered on and within range of your Wi-Fi router.

  • You have the correct Wi-Fi network name (SSID) and password.

  • Your router is functioning properly.

Step 2: Connect the Printer to Wi-Fi

Using the Printer’s Control Panel

  1. Press the Menu button on the printer.

  2. Navigate to Network > WLAN > Setup Wizard.

  3. Select your Wi-Fi network from the list.

  4. Enter your Wi-Fi password carefully.

  5. Press OK, then Yes to apply settings.

  6. The printer will attempt to connect; once successful, a confirmation message appears.

Using WPS (Wi-Fi Protected Setup) (If Supported)

  1. Press the WPS button on your router.

  2. On the printer, go to Menu > Network > WLAN > WPS.

  3. Press OK and wait for the connection to establish.

Step 3: Install Brother Printer Software

For Windows:

  1. Download the latest drivers from Brother’s official website.

  2. Run the installer and select Wireless Network Connection during setup.

  3. Follow the on-screen instructions to complete the installation.

For Mac:

  1. Open System Preferences > Printers & Scanners.

  2. Click + to add a printer.

  3. Select your Brother printer from the list and install the necessary drivers.

Step 4: Print a Test Page

  1. Open any document.

  2. Select your Brother printer in the Print dialog.

  3. Click Print to test the connection.

Step 5: Troubleshooting Wi-Fi Connection Issues

  • Check Signal Strength: Move the printer closer to the router.

  • Verify Network Credentials: Ensure the SSID and password are correct.

  • Restart Printer and Router: Power off and restart both devices.

  • Update Firmware: Check for firmware updates on Brother’s website.

  • Reset Network Settings: Go to Menu > Network > Network Reset on the printer.

Conclusion

Setting up your Brother printer on Wi-Fi ensures seamless wireless printing. Follow these steps carefully, and if issues persist, refer to Brother’s support for additional help.